BBZNJ - 1203 PRIMER
- MSDS: BBZNJ
- Manufacturer: DOW CORNING CORP
- Product Name: 1203 PRIMER
- National Stock Number: 5970-00K000170
Product Identification
Product ID:1203 PRIMER
MSDS Date:01/01/1985
FSC:5970
NIIN:00K000170
MSDS Number: BBZNJ
Responsible Party
MIDLAND, MI 48640
US
Emergency Phone: 517-496-5900
Info Phone: 517-496-5900
Cage: 5D028
Contractor
Telephone: 517-496-4388
Cage: 71984
Ingredients
NAPHTHA (PETROLEUM SPIRITS OR BENZIN)
CAS: 8030-30-6
RTECS: SE7555000
Fraction By Weight: 65%.
OSHA PEL 100 PPM
TOLUENE (SARA III)
CAS: 108-88-3
RTECS: XS5250000
Fraction By Weight: 15%.
OSHA PEL 200 PPM/150 STEL
ACGIH TLV: 50 PPM; 9293
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
ISOPROPYL ALCOHOL (SARA III)
CAS: 67-63-0
RTECS: NT8050000
Fraction By Weight: <5%
OSHA PEL 400 PPM/500 STEL
ACGIH TLV: 400 PPM/500STEL;9192
Hazards
Effects of Overexposure:MAY CAUSE SLIGHT ANESTHESIA, HEADACHES,ETC.
First Aid
First Aid:INHA: MOVE TO FRESH AIR; CALL DR.;SKIN & EYES: FLUSH W/WATER.
Fire Fighting
Flash Point:50 F CC
Lower Limits:1.2
Upper Limits:6.0
Extinguishing Media:CARBON DIOXIDE OR FOAM
Fire Fighting Procedures:NONE
Unusual Fire/Explosion Hazard:NONE
Accidental Release
Spill Release Procedures:MOP,WIPE, OR SOAK UP WITH ABSORBENT MATERIAL
USING PROPER PROTECTIVE EQUIP.
Handling
Handling and Storage Precautions:SAME AS FOR ANY FLAMMABLE PRODUCTS.
Exposure Controls
Respiratory Protection:ORGANIC VAPOR TYPE
Ventilation:MECHANICAL: RECOMMENDED
Protective Gloves:RUBBER/PLASTIC
Eye Protection:SAFETY GLASSES
Other Protective Equipment:AS REQUIRED BY LOCAL PROCEDURES
Supplemental Safety and Health
Chemical Properties
HCC:F3
Boiling Pt:B.P. Text:210 F
Vapor Pres:25
Vapor Density:> 1
Spec Gravity:0.9
Evaporation Rate & Reference:(ETHER = 1) < 1.
Solubility in Water:< 0.1 %
Appearance and Odor:LIQUID - SOLVENT ODOR
Percent Volatiles by Volume:>10
Stability
Stability Indicator/Materials to Avoid:YES
CORROSIVES, OXIDIZERS
Stability Condition to Avoid:SOURCES OF IGNITION
Hazardous Decomposition Products:METAL OXIDES, CO*2, TRACES OF INCOMPL.
BRND CARBON PRODUCTS
Disposal
Waste Disposal Methods:REVIEW LOCAL,STATE, & FEDERAL REGULATIONS
CONCERNING HEALTH & POLLUTION TO DETERMINE APPROVED DISPOSAL
PROCEDURES. RESIDUE FROM EVAPORATED SOLVENT CAN BE LAND FILLED OR
BURNED.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.